详细内容

玻璃纤维棉

产品特性

•采用玻璃长纤维以非织物方式制成, ,透风量大,其阻力小,对漆雾Over-spray捕尘效率佳。

•应用于表面喷涂高质量漆雾过滤；捕捉率高PA-50/60/PA-100尤其适合应用开热回收系统；

•高强度的玻璃纤维递增结构；迎风面为绿色，出风面为白色。

•低压缩性能保持其外型不变，使其过滤纤维完全有利于储存油雾灰尘。

•难燃性,可耐温170℃。

•压缩包装在运输上可节省运费及储存空间，放松后仍可恢复原来状态。

•外框搭配可选择纸外框和镀锌铁框或铝合金框材质。

用途

一般空调系统之粗尘过滤

干式喷漆台，汽车喷漆房之排气系统，减少对环境的污染，环保。

性能参数

型号 Model PA-50/60 PA-100

捕集效率 Avg.arrestance(acc.EN779) 92%-96% 97%-99%

初期压损Initial pessure drop 15Pa 20Pa

最终压损Final pessure drop 250Pa 280Pa

风流量 Air velocity 0.7-1.75m/s 0.7-1.75m/s

容尘量 Dust holding at tested final 3200-3600 g/㎡ 3600-4900g/㎡

最高耐温Temp.resistance,const 170℃ 170℃

瞬间温度Temp.short peaks 190℃ 190℃

厚度 Normal thickness 50/60mm 100mm

标准尺寸（M）Roll sizes standard 0.8*20 1.0*20 2.0*20 0.8*20 1.0*20 2.0*20

注：可成卷供应或裁剪

其它规格尺寸及厚度均可根据客户要求定做

Fibreglass filter media

Speciality:

 Made of long fibreglass in non-woven way,large ventilation quantity,small resistance, good efficiency of the dust arrestance for the over-spray.

 It is applied to the superficial spray coating high quality painting-spray filtration, high dust catching, specially , PA-50/60/PA-100 is suitable for using heat recovery system

 High strength fibreglass increasing structure; the windward side is green ,the leeward side is white.。

 The low compression performance maintains its outlook，which is completely useful for the filtration fibre to keep the oil mist and the dust

 Nonflammability, heat resistance 170℃

 The compression packing may save the fare and the storage space in the transportation.After decompression, it will regain its original condition

 Outer frame may choose the paper frame , the galvanization iron frame,or aluminium alloy frame.

Using:

 Thick dust filtration for the general air-condition system.

 Applied to the dry spray painting platform and the exhaust gas system of the automobile spray painting room.It is environment-friendly, reducing the pollution to the environment

Remark:

Wide variety of sizes and thickness